Every Real-Forklift comes with a Thrustmaster T300 RS force feedback steering wheel.  Every unit we ship we add a glue plug to prevent users from moving the selector switch, but that is the first thing to check

In windows search type  joystick and then select setup USB game controller

Select the Thrustmaster controller setting.  If it shows you this then you have a communication problem between your steering wheel and windows operating system.

 

First things first.  Make sure the selector switch on the left side of the steering wheel is set to PS3.  We ship all our units with it glued in that position.  Once that is verified.  You will need to shut off the simulator and unplug the power from the back of the steering wheel base.  It is a three receptacle plug.  Wait 30 seconds for it to completely power down.  Plug back in and power-up your simulator.

Always stand clear of the steering wheel on boot up as it will run through a calibration.

Once that is done, go back to the joystick panel and see if it is now showing the correct Thrustmaster control panel.  If you see the image below then you are good to go.

 

If this doesn’t resolve your issue please contact us via email: [email protected]